2mm Nussbaum Massivholz

brown

Shared by @amalia.wagner87 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

Speed

Passes

Thickness

2mm

Die 2 mm dünne Nussholzplatte aus echtem Massivholz besticht durch ihre dunkelbräunliche, charakteristische Nussholzmaserung. Das harte und hochwertige Holz eignet sich hervorragend zum Laserschneiden. Geschnitten wurden mit dem S1, 40 W, 40% Leistung und 8 mm/s Geschwindigkeit. Das Material verkohlt nur wenig, wodurch die Schnittkanten sauber bleiben und kaum Schmauchspuren entstehen. Ideal für präzise und filigrane Laserprojekte.

More 2mm Nussbaum Massivholz settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

2mm · P22 S150

Cut by thickness

2mm · P40 S8 · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

Material2mm Nussbaum Massivholz

Color / Finishbrown

Size2mm

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @amalia.wagner87 in Atomm, xTool's community

View the original post →