CO2Supplier reference

Hard Wood

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector

Power

Speed

300 mm/s

More Hard Wood settings

Same material on Thunder Laser Nova 60. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P10 S300 mm/s · this one

Cut by thickness

P70 S10 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P10 · S300) in the center square — dial it in on scrap.

Machine Context

BrandThunder Laser

ModelNova 60

Laser typeCO2

Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialHard Wood

SupplierThunder Laser USA

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)