Maker Foundry

Pick your machine

6 machines
F1
1 setting
F1 Ultra
2 settings
F2
2 settings
F2 Ultra
1 setting
M2
4 settings
P2
3 settings
Reusable Pencil Drawing test grid
DiodeCommunity report

Reusable Pencil Drawing

Shared by @gabrielajacuinde on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
30
Speed
350
LPC
250
Passes
1
Thickness
7mm
wood-free graphite pencils Focus on the pencil surface. 2. Use the Blue Laser (455 nm). 3. Set: * Power: 30% * Speed: 280 mm/s * Lines: 250 lines/cm * Passes: 1 4. Run a test engraving. Note: If the engraving looks slightly burned, reduce the power or increase the speed

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelF1
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialReusable Pencil Drawing
Size7mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @gabrielajacuinde in Atomm, xTool's community
View the original post →