Pick your machine

2 machines have Acrylic - 3mm settings

Epilog Epilog Fusion Ascent 12 2 Epilog Fusion Pro 48 2

CO2Vendor

Acrylic - 3mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

20%

Passes

Frequency

100%

Thickness

3mm

scale

Epilog % (Speed / Power / Frequency)

Epilog's published Suggested Material Settings (Fusion Pro, 120 watt CO2 column). Speed and Power are Epilog % — not mm/s. Starting point only: test on scrap. Cast engraves frosted; extruded flame-polishes better.

More Acrylic settings

Same material on Epilog Fusion Pro 48. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P55 S100%P50 S100%P30 S100%

Cut by thickness

3mm · P100 S20% · this one6mm · P100 S10%9.5mm · P100 S5%13mm · P100 S2%

Score

3mm · P25 S60%

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S20) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro 48

Laser typeCO2

Wattage120W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic - 3mm

Size3mm

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)