CO2Supplier reference

Acrylic - 3mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

8 mm/s

Passes

Thickness

3mm

More Acrylic settings

Same material on Epilog Epilog Fusion Ascent 12. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P65 S90 mm/s

Cut by thickness

3mm · P100 S8 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S8) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelEpilog Fusion Ascent 12

Laser typeCO2

Wattage59W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic - 3mm

Size3mm

SupplierRowmark

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)