DiodeCommunity report

1/8"(3mm) Birch Plywood

white

Shared by @3dmatriks on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Combined (free)

Power

Speed

Passes

Thickness

3mm

Consiglio sempre di preparare accuratamente la superficie, levigandola e rendendola il più liscia e uniforme possibile prima di procedere con la lavorazione. Questo passaggio è particolarmente importante quando la superficie deve essere preparata per ricevere una stampa: l’applicazione di uno strato di primer, infatti, permette di creare una base più uniforme e favorisce una migliore adesione della stampa, garantendo così un risultato più resistente e duraturo.

More 1/8"(3mm) Birch Plywood settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelM2

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Birch Plywood

Color / Finishwhite

Size3mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @3dmatriks in Atomm, xTool's community

View the original post →

Pick your machine