CO2Supplier reference

Silicone

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

350 mm/s

Line Interval

0.04

Watch Bands

More Silicone settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P35 S350 mm/s · this oneP60 S300 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P35 · S350) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 9

Laser typeCO2

Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSilicone

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)