DiodeSupplier reference

Glass

No Prep w/oil + Paper

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

20 mm/s

min power

20%

More Glass settings

Same material on Ortur Laser Master 2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P70 S20 mm/s · this oneP50 S20 mm/s P55 S20 mm/s P65 S20 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P70 · S20) in the center square — dial it in on scrap.

Machine Context

BrandOrtur

ModelLaser Master 2

Laser typeDiode

Wattage5.5W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialGlass

Color / FinishNo Prep w/oil + Paper

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)