CO2Supplier reference

Leather

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

50 mm/s

Thickness

1mm

More Leather settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P70 S250 mm/s

Cut by thickness

1mm · P30 S50 mm/s · this one2mm · P45 S50 mm/s 3mm · P55 S9 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P30 · S50) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 9

Laser typeCO2

Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeather

Size1mm

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)