CO2Supplier reference

Leather

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

250 mm/s

Line Interval

0.085

Darkness guide (speed 250, line interval 0.085) — darkest first: 90%→P70 80%→P60 70%→P55 60%→P45 50%→P40 40%→P30 30%→P25 20%→P15

More Leather settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P70 S250 mm/s · this one

Cut by thickness

1mm · P30 S50 mm/s 2mm · P45 S50 mm/s 3mm · P55 S9 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P70 · S250) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 9

Laser typeCO2

Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeather

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)