CO2Community report

Leather

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

250 mm/s

Line Interval

0.085

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work. Darkness guide (speed 250, line interval 0.085) — darkest first: 90%→P63 80%→P54 70%→P50 60%→P41 50%→P36 40%→P27 30%→P23 20%→P14

More Leather settings

Same material on Aeon Laser Nova 10. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P63 S250 mm/s · this one

Cut by thickness

1mm · P30 S55.6 mm/s 2mm · P45 S55.6 mm/s 3mm · P55 S10 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P63 · S250) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelNova 10

Laser typeCO2

Wattage100W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeather

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)