CO2Community report

Silicone

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

350 mm/s

Line Interval

0.04

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work. (Watch Bands)

More Silicone settings

Same material on Aeon Laser Nova 10. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P32 S350 mm/s · this oneP54 S300 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P32 · S350) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelNova 10

Laser typeCO2

Wattage100W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSilicone

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)