Pick your machine

17 machines have Rock Stone settings

F2 Ultra (Single)

Engrave · Flat Surface 11 Score · Flat Surface 2

Rock Stone test grid

DiodeCommunity report

Rock Stone

black

Shared by @Neurospice Designs on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

62

Speed

212

LPC

240

Passes

1

Thickness

4.5mm

Tested on 4.5 mm black slate coasters using the xTool M1 Ultra 20W. Single-pass bitmap engraving at 212 mm/s and 62% power. Produced a clean, high-contrast white engraving with minimal dust and no additional finishing required. (still optional and recommended) Processed on the baseplate. Suitable for detailed artwork and fine line engraving.

More Rock Stone settings

Same material on xTool M1 Ultra. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

4.5mm · P62 S212 · this one4.5mm · P48 S300 4.5mm · P30 S160 P55 S130 4.5mm · P40 S120 4.5mm · P65 S160 4.5mm · P30 S250 4.5mm · P20 S160 4.5mm · P20 S160 4.5mm · P40 S120 4.5mm · P50 S200

Score

4.5mm · P60 S150 4.5mm · P70 S150

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelM1 Ultra

Laser typeDiode

Wattage20W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRock Stone

Color / Finishblack

Size4.5mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Neurospice Designs in Atomm, xTool's community

View the original post →