Pick your machine

16 machines have 1/4"(6mm) Birch Plywood settings

Cut · Flat Surface 15 Engrave · Flat Surface 14 Score · Flat Surface 8

1/4"(6mm) Birch Plywood test grid

DiodeCommunity report

1/4"(6mm) Birch Plywood

Shared by @Klearz on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

100

Speed

6

Passes

1

Thickness

6mm

Xtool S1 40W auto air assist on 6mm birch plywood. Ive been lowering the focus down 3mm on this cut at 6mm per second to give a cleaner surface finish as well as a nice clean cut where all pieces clean drop out.

More 1/4"(6mm) Birch Plywood settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/4"(6mm) Birch Plywood

BrandHome Hardware Smiths Falls Ontario

Size6mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Klearz in Atomm, xTool's community

View the original post →