CO2Maker Foundry

Leather

Dark Tan (Raw Veg.)

Shared by Maker Foundry

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

500

Line Interval

0.042

Frequency

14000

Pulse Width

140

Dark Tan (Raw Veg.) | LinkPath: 55w RF/Leather/Dark Tan (Raw Veg.)

More Leather settings

Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P50 S500 · this oneP10 S1000 P10 S1000 P60 S300

Cut by thickness

P95 S5 P70 S5 P70 S20

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P50 · S500) in the center square — dial it in on scrap.

Machine Context

BrandThunder Laser

ModelBolt Pro 55

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeather

Color / FinishDark Tan (Raw Veg.)

Provenance

Source type

Maker Foundry

Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.

License

CC0 (Public Domain)