Maker Foundry

Pick your machine

17 machines
D1
13 settings
D1 Pro
16 settings
D1 Pro 2.0
15 settings
F1
9 settings
F1 Lite
4 settings
F1 Ultra
14 settings
F2
54 settings
F2 Ultra
11 settings
F2 Ultra (Single)
4 settings
F2 Ultra UV
7 settings
M1
10 settings
M1 Ultra
13 settings
M2
27 settings
P2
4 settings
P2S
4 settings
P3
6 settings
S1
41 settings
Engrave · Flat Surface 36Score · Flat Surface 5
Rock Stone test grid
DiodeCommunity report

Rock Stone

black

Shared by @Chaplain22 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
25
Speed
180
LPC
120
Passes
1
Thickness
4.5mm
defocus
3 mm
slate burnt on xtool s1 40w. Slate was grinded down smooth and then a light coat of clear gloss was applied.

More Rock Stone settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelS1
Laser typeDiode
Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRock Stone
Color / Finishblack
BrandThe slate can be bought from xtool or amazon
Size4.5mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Chaplain22 in Atomm, xTool's community
View the original post →