Pick your machine

17 machines have Rock Stone settings

13 settings

Engrave · Flat Surface 36 Score · Flat Surface 5

DiodeCommunity report

Rock Stone

black

Shared by @rosienarrowboat on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

Speed

220

LPC

Passes

Thickness

4.5mm

I sanded the slate flat and gave a good coat of a budget matt black paint then sat for 24 hours prior to engraving! I have be tinkering with slate for a while on and off and i believe these are my best results to date! Remember use matt black as better result than gloss in my eyes.

More Rock Stone settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRock Stone

Color / Finishblack

Size4.5mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @rosienarrowboat in Atomm, xTool's community

View the original post →